Welcome to KEPSales.com
CUSTOMER SUPPORT 1-877-268-3700 | MON-FRI, 8AM-5PM CT
ADDITIONAL TECH SUPPORT

AMP-1 & AMP-1-10K

Preamp & Signal Conditioner for Magnetic Pickups

AMP-1
FEATURES
  • Ultra Low Speed to 15 kHz Operation
  • 20 mV to 50 V Sensitivity
  • 100 mA Current Sinking Output
  • 11 to 26 VDC Power Supply Range
  • Easy Mount Metal Housing
  • Screw Terminal Hookup
DESCRIPTION
  • The KEP AMP 1 amplifies the low level signals from a magnetic pickup or flow transmitter by a factor of more than a hundred times to drive any ratemeter, counter or controller. The unit uses only 30 mA and operates from 11 to 26 VDC. It has a 2.7K pullup resistor attached to the open collector output and sinks a minimum of 100 mA to less than 1 V from a maximum of 26 VDC. It is mounted in a rugged 2" x 3" metal housing with screw terminals for easy installation. Operating temperature is 32 to 140° F (0 to 60° C).

    A special version, the AMP1-10k, is available with 10 kΩ impedance for use with turbine and paddle wheel flowmeters.

CATALOG NO. DESCRIPTION
AMP-1 / AMP-1-10K

Preamp & Signal Conditioner for Magnetic Pickups