Counters & Totalizers
The KE610 Series coin meter and counter incorporates the latest manufacturing technology together with a patented basic design to achieve high performance over a wide temperature range with low power consumption. The KE610 a perfect choice as a gaming counter or for vending machine counter applications.
The EP770 series incorporates the latest manufacturing technology together with a basic design to achieve high performance over a wide temperature range with very low power consumption. These counters can be mounted by rear screw mount.
The 130k series display counters are battery-powered. They are controlled by contact or voltage pulses. They may be used in various applications, e. g. totalizing, parts counting, position acquisition, differential counting, etc. In addition, the various models with specific input types may be extended using control inputs to select operating modes and set for almost any application thanks to adjustable operating modes.
The CTR-54U is a multipurpose device that can be programmed as a counter, timer or ratemeter. It accepts DC pulse inputs up to 60kHz. It is a perfect solution for all high speed counting, timing and rate monitoring applications.
The CTR-52U is a 1/32 DIN size multipurpose device that can be programmed as a counter, timer or ratemeter. It accepts DC pulse inputs up to 60kHz. It is a perfect solution for all high speed counting, timing and rate monitoring applications.
The 8000 Series is a rugged, handsome, 8 digit electronic totalizing counter for sophisticated applications where high count speeds are required. It features a built-in 110/220 VAC - 50 to 400 Hz power supply which both powers the counter and provides 80 milliamps-of 12 VDC or regulated 5 VDC to power photoelectric and proximity sensors.
The MiniCount (MC) is a dual input, bi-directional totalizer only. This counter does not have presets, outputs or scaling available. Each pulse received on input A or input B equals one count.
The B Series totalizing counter utilizes an all plastic housing and frame to achieve lower cost without sacrificing quality. Count life is 200 million minimum with optional speeds to 50 counts per second possible. Spring clip or two screw mountings are standard.
The K series is a 4 or 8 digit totalizer electronic LED counter. Its unique count input accurately registers simultaneous overlapping pulses, is optically isolated, and accepts counts at speeds up to 100 kHz.
The MINI-KAL series of small, easy-to-mount LCD counters can be mounted directly to a PC board. They are useful for counting applications where space is tight, and where OEM instrument makers want a pre-designed counter.
The KAL-D06 counters are small, lithium battery powered, totalizing counters that are panel mounted. The counters are designed as replacements for standard electro-mechanical counters.
KAL-DINs are small, lithium battery powered, electronic counters that are panel mounted. The counters are designed as replacements for standard electro-mechanical counters.
The KAL-DAS is a small, battery powered, add-subtract counter suitable for panel mounting. It is powered by an internal lithium battery with an operating expectancy of 10 years.
The K0 Series is a tiny 4, 5 or 7 digit totalizer. The armature system and novel anti-shock and vibration driving system provide a high degree of counting accuracy at a very low power consumption (250mW STD.; 30mW OPT.).
We offer a wide variety of enclosures for our electronic and electromechanical products. Choose from a large selection of environmental protection specifications and mounting styles.
We offer a wide variety of enclosures for our electronic and electromechanical products. Choose from a large selection of environmental protection specifications and mounting styles.
We offer a wide variety of enclosures for our electronic and electromechanical products. Choose from a large selection of environmental protection specifications and mounting styles.
We offer a wide variety of enclosures for our electronic and electromechanical products. Choose from a large selection of environmental protection specifications and mounting styles.
The E series counter incorporates the latest manufacturing technology together with a basic design to achieve high performance over a wide temperature range with very low power consumption. These counters can be mounted by snap-in front flange or rear screw mount.
Have a project, not just a part list? Our controls engineers design, program and commission complete systems.