| Process
& Level Monitors |
Process Monitor with Analog Inputs
- Analog
Input 0-20 mA, 4-20 ma 0-5V, 0-10V or 1-5V
- Display
Rate, Pressure, Level, Temperature, Watts,
etc., Peak & Valley
- Calibration,
High and Low Values (-9999 to 49999)
Fully Programmable Through Keypad
- NEMA
4X / IP65 Front
- +24V
Output for Peripherals
- 16
Bit A/D Resolution
- 2
Form C SPDT Relays (optional)
- 2
Stage Panel Lockout
|
Featuring 4 1/2 digits of bright, 7-segment LED displays, the
Intellect-69PM2 is a process monitor which accepts analog
signal inputs. The unit can be field programmed to accept
0-20mA, 4-20mA, 0-5V, 0-10V or 1-5V signals. Two assignable
set points are standard for high/low alarm outputs. The high
and low scaling settings (-9999 to 49999) are programmable
from the front panel. By pressing the "view" button,
the unit will display: process status, peak or valley. Press
the lock button once to freeze the display. Press the lock
button 4 times to enter lock code for panel lock-out. RS232,
RS422 and 4-20mA analog out are available options for
interfacing to a host computer or strip chart recorder.
|
Loop
Powered Indicator
- Linear
or Square Root Extraction of Input
- 3 1/2
or 4 1/2 Digit Display (Selectable)
- Calibration,
High and Low Values Fully
Programmable Through Keypad
- NEMA
4X / IP65 Front
- No
Dipswitches or Pots to Adjust
- 16
Bit A/D Resolution
- Isolated
Scaled Pulse Output
- Password
Protection of Menu
|
Featuring up to 4 1/2 digits of display, the Squirt-R is a
loop powered indicator capable of accepting either linear or
square root 4-20 ma inputs. Numeric password protection
prevents unauthorized access to the menu. The easy-to- read
menu prompts make the Squirt-R so easy to program that you
will feel comfortable programming it without the use of a
manual.
|
Multi-Function Level
Indicator,
Controller and Batcher
- Level
and Tank Volume Indicator
- Batching
by Level
- Level
Control, Tank Volume,
Corrected Volume and Mass Calculations
- Menu
Selectable Hardware & Software Features
- Two
Line LCD or VFD Display
- Isolated
Outputs Standard
- RS-232
Port Standard, RS-485 Optional
- DIN
Enclosure with Two Piece Connectors
- DDE
Server & HMI Software Available
|
The LEVELtrol II Flow Computer satisfies the instrument
requirements for a variety of level sensor types in liquid
applications. Multiple tank geometry's, fluid equations and
instrument functions are available in a single unit with many
advanced features.
The
alphanumeric display shows measured and calculated parameters
in easy to understand format. Single key direct access to
measurements and display scrolling are supported
The
versatility of the LEVELtrol II permits a wide measure of
versatility within the instrument package. The various
hardware inputs and outputs can be “soft” assigned to meet
a variety of common application needs. The user “soft
selects” the usage of each input/output while configuring
the instrument. Consider the following illustrative examples.
The
isolated analog output can be chosen to follow level, tank
volume, corrected tank volume, tank mass, temperature, or
density by means of a menu selection. Most hardware features
are assignable by this method.
The user
can assign the standard RS232 Serial Port for data logging,
transaction printing, or for connection to a modem for remote
meter reading.
|
Pulse
Counters, Position Displays,
Rate Meters, Time Meters & Combinations
- LED
display with very high luminosity
- 0.315"
(8mm) digit height
- 6
digit display
- DIN
housing, 1.88"x.944" (48x24mm)
- Easy
programming with only 2 buttons
- Connection
with screw terminal
- IP65
NEMA 4X (front)
- Input
pulse-shape variable (Schmitt Trigger
characteristics)
|
520K Simple Display Counter
521K Totalizer and Postion indicator
522K Frequency meter and Tachometer
523K Time meter
524K Multipurpose device
525K Adding Counter and Tachometer
526K 2 Display Counters
527K Display Counter and Timemeter
528K 2 Time meters
529K Analog Display
|
Temperature/Process
Monitor Features
• Very bright
LED display, height 14mm
• DIN housing,
96 x 48 mm
• Programmable
operating curve for
standard signals, thermocouples, resistance
thermometers, etc.
• Programmable
operating curve, even nonlinear,
allowing the use of economical sensors
• Two relay
outputs with two preset limit values |
520K Simple Display Counter
521K Totalizer and Postion indicator
522K Frequency meter and Tachometer
523K Time meter
524K Multipurpose device
525K Adding Counter and Tachometer
526K 2 Display Counters
527K Display Counter and Timemeter
528K 2 Time meters
529K Analog Display
|
|
|
|
